Vertical Inclinometer System
The Digital Inclinometer System comprises a biaxial probe, cable reel and a rugged field PC supplied with ‘Inport’ data logging software. The Digital Inclinometer System takes highly accurate readings of lateral deflections.
A Bluetooth connection between the instrument and the field PC makes taking readings fast, simple and allows for winding of the cable reel as you take readings without having to disconnect datalogging equipment. The Kevlar reinforced cable provides strength but yields significant weight reductions.
- No connectors between probe, cable reel and field PC
- Probe is manufactured from 316 stainless steel
- Precision sprung wheel assemblies
- Bluetooth connection between cable reel and field PC
- Accurate and precise measurements using MEMS sensors
- Repeatable depth control using metal markers and cable gate system
- Field PC allows easy interface with most office systems and applications
- Enhanced ‘Inport’ software to use with field PC for easy data capture
- Eliminates water ingress and connection problems
- Digital signal allows interference-free data transmission
- Advanced electronics ensure long, trouble free use in a site environment
- Can take a day’s worth of readings on a single battery charge
- Lightweight and easily portable
The inclinometer probe is inserted into inclinometer casing.
The probe is connected by a graduated cable to the cable reel. A ‘key fob’ activates the saving of readings from the accelerometers. These are transmitted to the field PC from the cable reel via Bluetooth transmission and saved.
Displacement readings are taken at regular intervals of 0.5m within the casing (the gauge length between the probe wheels). This is measured and controlled by metal markers crimped around the cable that pass through a notch in the cable gate, giving an exact position for each reading. An initial or ‘base’ set of inclinometer readings are obtained at each increment within the casing.
The summation of each incremental reading provides a profile of horizontal displacement of the casing as a function of depth. When you take all subsequent readings at identical depths, the comparison of successive casing profiles indicates the depth, direction, magnitude and the rate of change of movement. You can see the clearest indication of movement by plotting the change in displacement of the casing against depth.
Inclinometer systems measure lateral movement in the ground or in a structure. They are useful for determining the depth, direction, magnitude, and also rate of movement.
For example, they can be used to ascertain the stability of retaining walls by measuring bending and rotation in the retaining wall. They can also reveal ground movement that could affect other buildings. Inclinometer systems can be used to detect and monitor deformation of upstream slabs of concrete-faced rock-fill dams, to monitor the up and downstream displacements of embankment and concrete dams and to define and monitor shear zones in the foundations of all dams.
The measurements of recorded movement can be utlised to check that the deflections are within the design assumptions. Continue monitoring to establish any long term effects after works have finished.
Use inclinometer casing in boreholes, embedded in fill material, cast into concrete or attached to structures for the following typical applications:
- Detecting slope failures and landslides
- Determining shear and slip zones
- Monitoring diaphragm or sheet pile walls
- Monitoring bending in piles
- Verifying design assumptions and finite element analysis
- Long term monitoring purposes
- Monitoring dams
- Detecting and recording ground movement due to tunnelling operations
- Monitoring retaining walls